UV (High Gloss) Folded Business Cards
Matte Folded Business Cards
Specialty Folded Business Cards
Folded Business Cards are unique because they can hold twice the amount of information and still exhibit a good first impression. Cards with UV coating that have a very glossy and shiny look.
Folded Business Card 14pt + UV (High Gloss)
| Paper Type |
95 Bright 14pt C2S Stock
|
| Coating |
High Gloss UV coating
|
| Color |
Full color CMYK: 1 sided (4/0), or 2 sided (4/4)
|
| Quantities |
Ranges from 25 to 25,000
|
| Sizes |
3.5" x 4"
|
| Finishing |
Trim, score and box.
|
| File Type |
Print Ready PDF file
|
- Step 1 : Ensure the file matches the product's required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
- Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork's color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
- Step 3 : Export all files into PDF format with bleeds.
Download Setup Guide
How to set up multi-page files properly- 4" x 3.5" Folded Business Card - Horizontal
- 3.5" x 4" Folded Business Card - Vertical
File Orientation Guide
How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.Folded Artworks (Greeting Cards, Folded Business Cards, etc.)
LEGEND: OFC - Outside Front Cover; OBC - Outside back cover; ITP - Inside Top Panel IBP - Inside Bottom Panel (a.k.a Inside Cover)
LEGEND: OFC - Outside Front Cover; OBC - Outside back cover; ILP - Inside Left Panel (a.k.a Inside Front Cover); IRP - Inside Right Panel (a.k.a Inside Back Cover)
How To Set Up Your Files
Learn how to set up your files the right way.General File Preparation Guidelines
- Download our guides to ensure a more optimal print result.
- Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
- Files must be submitted with proper orientation to ensure proper back up.
- It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
- File must consist of 1/8" bleed and all important art and text must be within the safety margin.
- Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
- Black type should have the following values: C0, M0, Y0, K100.
- Embed or outline all fonts.
- For best colour results, supply a CMYK only files.
