Pull Up Banners

Pull up banners are an effective and portable way to communicate your message at events and shows. Your order comes with an included pre-installed banner stand.

Premium Pull Up Banners 13oz Matte Vinyl

Paper Type

13oz Matte Vinyl

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0)

Quantities

Ranges from 1 to 10

Sizes
33"x81"
Finishing

Cut to size. Installed in premium banner stand.

File Type

Print Ready PDF file

Special Instructions

Ensure that your PDF artwork is 33” x 81”.

Bottom 3” of your artwork should not consist of important artwork because it will be hidden by the stand.

 

  • Step 1 : Ensure the file matches the product's required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork's color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

Special Instructions: Ensure that your PDF artwork is 33'' x 81''. Bottom 3'' of your artwork should not consist of important artwork because it will be hidden by the stand.

Download Setup Guide

How to set up multi-page files properly

  • 33" x 81"

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8" bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.

4mm Foam Board

Foam board is a lightweight sign that is ideal for the indoors.

4mm Foam Board

Paper Type

4mm Foam Core

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0), or 2 sided (4/4)

Quantities

Ranges from 1 to 200

Sizes
6″x24″ 6″x32″ 6″x36″ 12″x12″ 12″x16″
12″x18″ 12″x24″ 12″x36″ 12″x48″ 18″x24″
24″x24″ 24″x32″ 24″x36″ 24″x48″ 25″x37″
32″x48″ 36″x36″ 36″x48″ 48″x48″
Finishing

Cut to size. Grommets are optional.

File Type

Print Ready PDF file

  • Step 1 : Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork’s color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

Download Setup Guide

How to set up multi-page files properly

  • 6″ x 24″
  • 6″ x 32″
  • 6″ x 36″
  • 12″ x 12″
  • 12″ x 16″
  • 12″ x 18″
  • 12″ x 24″
  • 12″ x 36″
  • 12″ x 48″
  • 18″ x 24″
  • 24″ x 24″
  • 24″ x 32″
  • 24″ x 36″
  • 24″ x 48″
  • 32″ x 48″
  • 36″ x 36″
  • 36″ x 48″
  • 48″ x 48″

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.

Car Magnets (30mil)

A thick magnet that can be placed on vehicle doors to add corporate branding.

Car Magnets (30mil)

Paper Type

30mil Magnet

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0)

Quantities

Ranges from 1 to 10

Sizes
9″x9″ 9″x12″ 9″x18″ 9″x24″ 12″x12″
12″x18″ 12″x24″ 18″x18″ 18″x24″ 24″x24″
Finishing

Cut to size. Rounded corners are optional

File Type

Print Ready PDF file

Special Instructions

– Clean and dry metal surface before applying magnet
– Choose rounded corners for stronger magnetic grip
– Remove magnet before a car wash
– Remove and clean magnet regularly

  • Step 1 : Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork’s color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

Download Setup Guide

How to set up multi-page files properly

  • 9″ x 9″9″ x 9″ (round corners)
  • 9″ x 12″9″ x 12″ (round corners)
  • 9″ x 18″9″ x 18″ (round corners)
  • 9″ x 24″9″ x 24″ (round corners)
  • 12″ x 12″12″ x 12″ (round corners)
  • 12″ x 18″12″ x 18″ (round corners)
  • 12″ x 24″12″ x 24″ (round corners)
  • 18″ x 18″18″ x 18″ (round corners)
  • 18″ x 24″18″ x 24″ (round corners)
  • 24″ x 24″24″ x 24″ (round corners)

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.

Adhesive Vinyl (Glossy)

A durable, outdoor-friendly material that is perfect for mounting on a range of subtrates and surfaces including painted dry wall. This product is used for point of purchase displays, trade show displays, hard-to-adhere substrates and permanent wall graphics.

Glossy Adhesive Vinyl

Paper Type

3.5 mil white glossy vinyl with permanent adhesive

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0).

Quantities

Ranges from 1 to 10

Sizes
6″ x 24″ 6″ x 32″ 6″ x 36″ 12″ x 12″ 12″ x 16″
12″ x 18″ 12″ x 24″ 12″ x 36″ 12″ x 48″ 18″ x 24″
24″ x 24″ 24″ x 32 24″ x 36″ 24″ x 48″ 32″ x 48″
36″ x 36″ 36″ x 48″ 48″ x 48″ 60″ x 12 60″ x 24″
60″ x 36″ 60″ x 48″ 72″ x 12″ 72″ x 24″ 72″ x 36″
72″ x 48″
Finishing

Cut to size.

File Type

Print Ready PDF file

Special Instructions

Material is a permanent application. Cannot be moved after removing from initial surface

Remove adhesive back and place graphic on the surface.

Before placement, ensure graphic is completely dry and place it on clean and flat surface.

  • Step 1 : Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork’s color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

Download Setup Guide

How to set up multi-page files properly

  • 12″ x 24″
  • 12″ x 36″
  • 12″ x 48″
  • 24″ x 24″
  • 24″ x 36″
  • 24″ x 48″
  • 36″ x 36″
  • 36″ x 48″
  • 48″ x 48″
  • 72″ x 12″
  • 72″ x 24″
  • 72″ x 36″
  • 72″ x 48″

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.

Window Perforated Vinyl

Transform store front windows with eye-catching images and advertising. The see-through material creates the illusion of an opaque design for passerbys without blocking light entering the store.

Window Perforated Vinyl

Paper Type

6mil Adhesive Perforated Vinyl (60/40 perf ratio)

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0). Printed on the white side.

Quantities

Ranges from 1 to 10

Sizes
6″ x 24″ 6″ x 32″ 6″ x 36″ 12″ x 12″ 12″ x 16″
12″ x 24″ 18″ x 12″ 36″ x 12″ 48″ x 12″ 18″ x 24″
24″ x 24″ 20″ x 30″ 24″ x 32″ 24″ x 36″ 24″ x 48″
32″ x 48″ 36″ x 36″ 36″ x 48″ 48″ x 48″ 60″ x 12″
60″ x 24″ 60″ x 36″ 60″ x 48″ 12″ x 72″ 24″ x 72″
36″ x 72″ 48″ x 72″ 36″ x 84″ 30″ x 84″ 48″ x 84″
48″ x 96″
Finishing

Cut to size.

File Type

Print Ready PDF file

Special Instructions

Material is one-time use. Cannot be moved after removing from initial surface

Remove adhesive back and place graphic on the outside of the window.

Before placement, ensure graphic is completely dry and place it on clean and flat glass surface.

  • Step 1 : Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork’s color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.

Posters

These posters are printed on a semi-gloss card stock material.

Large Format Posters 8pt C2S

Paper Type

8pt C2S Stock

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0)

Quantities

Ranges from 1 to 10

Sizes
12″x24″ 12″x36″ 12″x48″ 12″x60″ 16″x20″
20″x24″ 22″x28″ 24″x24″ 24″x36″ 24″x36″
24″x48″ 36″x60″ 48″x48″ 48″x60″ 60″x60″
72″x12″ 72″x24″ 72″x36″ 72″x48″ 72″x60″
84″x12″ 84″x24″ 84″x36″ 84″x48″ 84″x60″
96″x12″ 96″x24″ 96″x36″ 96″x48″ 96″x60″
Finishing

Cut to size.

File Type

Print Ready PDF file

  • Step 1 : Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork’s color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

Download Setup Guide

How to set up multi-page files properly

  • 12″ x 24″
  • 12″ x 36″
  • 12″ x 48″
  • 12″ x 60″
  • 22″ x 28″
  • 24″ x 24″
  • 24″ x 36″
  • 24″ x 48″
  • 36″ x 60″
  • 48″ x 48″
  • 48″ x 60″
  • 60″ x 60″
  • 72″ x 12″
  • 72″ x 24″
  • 72″ x 36″
  • 72″ x 48″
  • 72″ x 60″
  • 84″ x 12″
  • 84″ x 24″
  • 84″ x 36″
  • 84″ x 48″
  • 84″ x 60″
  • 96″ x 12″
  • 96″ x 24″
  • 96″ x 36″
  • 96″ x 48″
  • 96″ x 60″

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.

20pt Styrene

A lightweight, yet durable PVC sheet.

20pt Styrene

Paper Type

20pt Styrene

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0), 2 sided (4/4)

Quantities

Ranges from 1 to 200

Sizes
6″x24″ 6″x32″ 6″x36″ 12″x12″ 12″x16″
12″x18″ 12″x24″ 12″x36″ 12″x48″ 18″x24″
24″x24″ 24″x32″ 24″x36″ 24″x48″ 32″x48″
36″x36″ 36″x48″ 48″x48″
Finishing

Cut to size.

File Type

Print Ready PDF file

  • Step 1 : Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork’s color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

Download Setup Guide

How to set up multi-page files properly

  • 6″ x 24″
  • 6″ x 32″
  • 6″ x 36″
  • 12″ x 12″
  • 12″ x 16″
  • 12″ x 18″
  • 12″ x 24″
  • 12″ x 36″
  • 12″ x 48″
  • 18″ x 24″
  • 24″ x 24″
  • 24″ x 32″
  • 24″ x 36″
  • 24″ x 48″
  • 32″ x 48″
  • 36″ x 36″
  • 36″ x 48″
  • 48″ x 48″

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.

Canvas Roll

Canvas prints are typically used for photography and canvas art pieces.

Canvas Roll

Paper Type

Canvas

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0)

Quantities

Ranges from 1 to 10

Sizes
12″x24″ 12″x36″ 12″x48″ 24″x24″ 24″x36″
24″x48″ 36″x36″ 36″x48″ 48″x48″ 60″x12″
60″x24″ 60″x36″ 60″x48″ 72″x12″ 72″x24″
72″x36″ 72″x48″ 84″x12″ 84″x24″ 84″x36″
84″x48″ 96″x12″ 96″x24″ 96″x36″ 96″x48″
Finishing

Cut to size. 1 inch wrap is optional. Shipped rolled. Frame not included.

File Type

Print Ready PDF file

Special Instructions

Select 1 inch wrap if you require an inch of extra blank canvas material (on all sides) for framing purposes.

  • Step 1 : Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork’s color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

Download Setup Guide

How to set up multi-page files properly

  • 12″ x 24″
  • 12″ x 36″
  • 12″ x 48″
  • 12″ x 60″
  • 24″ x 24″
  • 24″ x 36″
  • 24″ x 48″
  • 36″ x 36″
  • 36″ x 48″
  • 48″ x 48″
  • 60″ x 12″
  • 60″ x 24″
  • 60″ x 36″
  • 60″ x 48″
  • 72″ x 12″
  • 72″ x 24″
  • 72″ x 36″
  • 72″ x 48″
  • 84″ x 12″
  • 84″ x 24″
  • 84″ x 36″
  • 84″ x 48″
  • 96″ x 12″
  • 96″ x 24″
  • 96″ x 36″
  • 96″ x 48″

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.

Sintra

Sintra is lightweight but very durable material. It is particularly a great choice for outdoor signage.

Paper Type

3mm Sintra

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0), or 2 sided (4/4)

Quantities

Ranges from 1 to 10

Sizes
6″x24″ 6″x32″ 6″x36″ 12″x12″ 12″x16″
12″x18″ 12″x24″ 12″x36″ 12″x48″ 18″x24″
24″x24″ 24″x32″ 24″x36″ 24″x48″ 32″x48″
36″x36″ 36″x48″ 48″x48″
Finishing

Cut to size. Grommets are optional.

File Type

Print Ready PDF file

  • Step 1 : Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork’s color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

Download Setup Guide

How to set up multi-page files properly

  • 6″ x 24″
  • 6″ x 32″
  • 6″ x 36″
  • 12″ x 12″
  • 12″ x 16″
  • 12″ x 18″
  • 12″ x 24″
  • 12″ x 36″
  • 12″ x 48″
  • 18″ x 24″
  • 24″ x 24″
  • 24″ x 32″
  • 24″ x 36″
  • 24″ x 48″
  • 32″ x 48″
  • 36″ x 36″
  • 36″ x 48″
  • 48″ x 48″

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.

X Frame Banners

A great way to display banners for events and even in-store displays.

X-Frame Banners 13oz Matte Vinyl

Paper Type

13oz Matte Vinyl Banner

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0)

Quantities

Ranges from 1 to 10

Sizes
23.6″x63″
Finishing

Cut to size. Inclusion of X-frame unit is optional.

File Type

Print Ready PDF file

Special Instructions

Choose Yes to Include Stand if you need the stand to be included

  • Step 1 : Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork’s color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

Download Setup Guide

How to set up multi-page files properly

  • 23.6″ x 63″

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.