These signs are a portable and easy to use marketing tool that captures the attention of passing customers.

A-Frame Signs 4mm Coroplast

Paper Type

4mm Coroplast

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0)

Quantities

Ranges from 1 to 10

Sizes
18″(H)x24″(W) 36″(H)x24″(W)
Finishing

Cut to size. Includes a metal A Frame unit and 2 replaceable 1 sided 4mm coroplast signs

File Type

Print Ready PDF file

Special Instructions

If you are using directional arrows on your signs. Your file should be 2 pages with each arrow pointing in the opposite direction

  • Step 1 : Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CYMK 300 dpi with 1/16 inch bleeds on all sides
  • Step 2 : Separate artwork into two files: one is for foil lamination, for which the artwork’s color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
  • Step 3 : Export all files into PDF format with bleeds.

Note: Text size should be no smaller than 10 POINT and font should not be of BOLD type to allow foil to appear clearly and text to be readable (as per attached pic). Failing to do so will result into delays and/or creating product that is not as per expectation.

Download Setup Guide

How to set up multi-page files properly

  • 18″H x 24″W
  • 36″H x 24″W

File Orientation Guide

How to set up proper orientation for your files. File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

How To Set Up Your Files

Learn how to set up your files the right way.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  3. Files must be submitted with proper orientation to ensure proper back up.
  4. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  5. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  6. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  7. Black type should have the following values: C0, M0, Y0, K100.
  8. Embed or outline all fonts.
  9. For best colour results, supply a CMYK only files.

Large Format Guidelines

  1. Bleed is not required for large format projects, but it is recommended.

Leave a Reply

Your email address will not be published. Required fields are marked *